Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Wing

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Body

See other generations:
Video tutorial

To remove the front wing, it is first necessary to remove the headlights and front bumper; once this is done, unscrew the three mounting screws of the wing located along the inner edge of the bonnet; then remove the side indicator and the other two mounting screws located at the front; an additional screw is located at the end, at the door hinge: to remove this, you must take off the protective plastic cover.

Finally, remove the push clips that secure the wheel arch to the wing and one last screw found on the front pillar of the door: at this point, the wing can be removed.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How do you replace the diesel fuel filter of the Land Rover Freelander?
How do you replace the diesel fuel filter of the Land Rover Freelander?
Land Rover Freelander (2006-2016 / Freelander 2) In order to replace the fuel filter of the Land Rover Freelander, you need to loosen the screws that secure the front wheel of the vehicle: once this…
How to Remove the Door Panel on a Land Rover Freelander
How to Remove the Door Panel on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Removing the front door panel on this model is very straightforward, but there are some precautions to observe; before starting the removal of the pa…
Removing Engine Mount from Freelander 2
Removing Engine Mount from Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Removing the engine mount from a Freelander 2. Let’s look at the removal from inside the engine bay. Lift the front bonnet and secure it. Remove the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos