Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on Range Rover Sport

Model: Land Rover Range Rover MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Front bumper

See other generations:
Video tutorial

After raising the hood and securing it, start by unscrewing the plastic fasteners that secure the top of the bumper. Remove the clips with a wedge in the same area.

Once done, you can remove the entire large front grille. At this point, extract the fasteners that secure the bumper in the two wheel wells.

Unscrew the other bolts located above the bumper that are now accessible. Also, unscrew the fasteners that secure the bumper from underneath.

Disconnect all the cables connected to it and pull it out from its position. All steps are clearly shown in the video.

Good luck!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper of a Range Rover Sport
Removing the Rear Bumper of a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Today, you will learn how to remove the rear bumper of a Land Rover Range Rover Sport. First, open the trunk and remove the rubber plugs that cushion…
How to Set the Time on a Range Rover Sport
How to Set the Time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before you begin, sit in the driver's seat of your Range Rover Sport. Start by activating the onboard computer by pressing the power button located o…
Guide to Replacing the Timing Belt on the Land Rover Range Rover Sport
Guide to Replacing the Timing Belt on the Land Rover Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) In this brief guide, we will cover the main instructions on how to remove and replace the timing belt on the Land Rover Range Rover Sport. First, ope…

Other guides you may be interested in

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos