Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : Removing the front bumper on Range Rover L322

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover MK 3, L322 - Years 2002-2012
Part: Front bumper
Operation: Removing the front bumper on Range Rover L322

Open the hood and put on the special support rod. Unscrew the Phillips screws above the bumper with a suitable screwdriver. Lower yourself slightly and unscrew the screws near the fog lights. Lower down further and now unscrew the three lower screws that secure the bumper at the front. Finally, unscrew the screws that join the bumper itself to the wheel arches and, finally, you can start with the removal. To do this, I recommend that you pry a large flathead screwdriver or similar tool into the junction slots between the bumper and the rest of the vehicle.


Posted on 12 January 2024 by ScegliAuto



Where is the fuse box located in the Range Rover L322?
Land Rover Range Rover (2002-2012 / MK 3, L322) If you want to independently and within a few seconds locate the box that contains all the various fuses present on your Range Rover L322 (year 2006-
Land Rover Range Rover L322 front door panel assembly
Land Rover Range Rover (2002-2012 / MK 3, L322) Let's see in this video how to install the front door panel on a Land Rover Range Rover L322, in simple steps. First of all, open the front door and
How to unlock the gearbox of the Range Rover L322
Land Rover Range Rover (2002-2012 / MK 3, L322) In this video we see how to emergency unlock the gearshift of the Range Rover L322: if the transmission is stuck in park, we can release it in emerge

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos