Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace or Install the Front Fog Lights on the Land Rover Range Rover

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fog lights

See other generations:
Video tutorial

This guide will show you how to replace or install the bulbs for the front fog lights on the Land Rover Range Rover. First, move to the front of the vehicle and start unscrewing the mounting screws located on the side of the housing; then disconnect the electrical connector found at the back, removing the fog light bulb as shown in the video.

Replace and install the entire housing if necessary; fit it perfectly in place and reconnect, then check the operation of the light!


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Range Rover Sport?
How to Replace the Key Battery on a Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) If the battery in the Smart Key of your Land Rover Range Rover Sport is dead, follow the attached video guide for step-by-step instructions on how to…
Guide to Replacing the Timing Belt on the Land Rover Range Rover Sport
Guide to Replacing the Timing Belt on the Land Rover Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) In this brief guide, we will cover the main instructions on how to remove and replace the timing belt on the Land Rover Range Rover Sport. First, ope…
How to Install the Tire Pressure Sensor on the Land Rover Range Rover
How to Install the Tire Pressure Sensor on the Land Rover Range Rover
Land Rover Range Rover (2012-2021 / MK 2) Today, you will see in this brief guide the instructions to install or replace the Tire Pressure Monitoring System (TPMS) sensor on the Land Rover Ra…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos