Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the door lock actuator on a Land Rover Freelander

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Door lock

Today, let's look at how to remove and replace the door lock actuator on the front door of a Land Rover Freelander. First, open the front door and begin removing the door panel by unscrewing all the retaining screws; then disconnect the side window from the brackets by unscrewing the retaining screws, as shown in the video. Next, unscrew the retaining screws of the lock, disconnect the electrical connector to remove it; finally, install the new original part, following the video tutorial to the end!

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Door Lock on the Land Rover Freelander
How to Replace the Door Lock on the Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Below are the main steps to remove and replace the front door lock or central locking mechanism of the Land Rover Freelander. First, open the front d…
Replacing the Lock on a Land Rover Freelander 2
Replacing the Lock on a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Hello! Today, we will show you how to replace the lock on the second series Land Rover Freelander. Remove the short part of the handle as shown in th…
How to Change the Door Lock on a Land Rover Freelander 2
How to Change the Door Lock on a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) How to change the door lock on a Land Rover Freelander 2? Remove the door panel of the Freelander 2 to access the door lock. Disconnect the battery t…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos