Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to change the door lock of Land Rover Freelander 2

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Lock
Operation: How to change the door lock of Land Rover Freelander 2

How to change the lock of a Land Rover Freelander 2? We remove the door panel of the Freelander 2 to remove the door lock. We disconnect the battery terminals in the engine compartment, with a screwdriver we unscrew the screws located in the space of the upper lever of the door opening and the screws present in the handle. We remove the plastic covering near the lever, unscrew the screws left on the door panel and remove the clips fastening it. Remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We find and tightening screws of the lock and unscrew. We remove the lock from inside the car door.


Posted on 28 January 2024 by ScegliAuto



Replacing the lock on Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Bye! Today we show you how to replace the lock on Land Rover Freelander second series. Remove the short part of the handle as shown in the video, i.e
How to replace the door lock of the Land Rover Freelander.
Land Rover Freelander (1997-2006 / Freelander 1) Below we will show you the main steps that will allow us to disassemble and replace the lock on the front door or central locking of the Land Rover F
How to remove the rear door panel of a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before we are able to start, we will have to open the rear door of our Land Rover Freelander. Let's start by disengaging and removing the insert of t

Other guides that may interest you

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos