Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pump on the Land Rover Freelander?

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Clutch

See other generations:
Video tutorial

To replace the clutch pump on the Land Rover Freelander, lift the vehicle so that the front right wheel is off the ground. This allows you to remove the wheel and access the components behind it. You will need to completely disassemble the gearbox to locate the clutch and the pump positioned behind it. Remove the pump from its housing by unscrewing the screws and disconnecting the cable that connects it to the pedal.

This will allow you to insert the new replacement part and reassemble all previously removed components.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
How to Remove the Air Vents in a Land Rover Freelander 2
How to Remove the Air Vents in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video tutorial shows how to remove the air vents in a Land Rover Freelander 2. First, remove and extract the plastic panels located at the sides…
Replacing the High-Pressure Fuel Pump on the Land Rover Freelander TD4
Replacing the High-Pressure Fuel Pump on the Land Rover Freelander TD4
Land Rover Freelander (1997-2006 / Freelander 1) This video provides instructions to remove and replace the high-pressure fuel pump on the Land Rover Freelander TD4. First, open the bonnet and remov…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos