Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on the Land Rover Evoque 1

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

Let's discover the procedure needed to remove and replace the rear brake pads on the Land Rover Evoque. First, lift the vehicle and remove the rear wheel; then, unscrew the mounting bolts of the rear brake caliper, disconnecting the wear sensor cable.

Once the caliper is removed, you can take out the old brake pads and replace them with new ones; clean the caliper of any dirt before inserting the new pads. Finally, reassemble everything, following the video until the end!


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to replace the rear brake pads on the Land Rover Evoque?
How to replace the rear brake pads on the Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) You can replace the rear brake pads on the Land Rover Evoque by lifting the vehicle with a jack or lift, ensuring that the corresponding wheel is off…
What to Do BEFORE Changing the Rear Brake Pads on a Land Rover Evoque
What to Do BEFORE Changing the Rear Brake Pads on a Land Rover Evoque
Land Rover Evoque (2018-2026 / MK 2, L551) In this video, we will go through the procedure to follow BEFORE changing the rear brake pads on the Land Rover Evoque. On this vehicle, it is not en…
How to Replace the Rear Brake Pads on a Range Rover Evoque
How to Replace the Rear Brake Pads on a Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) How to replace the rear brake pads on a Range Rover Evoque? Let's see. Lift the vehicle on a column lift to the desired height, then remove the wheel…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos