Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : Interior lights ceiling light bulb

Land Rover Evoque - Interior lights ceiling light bulb

Land Rover Evoque (2011-2018 / MK 1, L538)
How do you change the interior light bulb on your Land Rover Evoque?
In order to replace the bulb of the interior lights of the Land Rover Evoque, it is necessary to pry the lower part of the corresponding ceiling light, so that …read all…
Posted on 10 December 2022 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
How to replace the ceiling light bulbs on Land Rover Evoque
How to replace the ceiling light bulbs on Land Rover Evoque. We lever between the glass of the ceiling light and the frame of the same (without breaking …read all…
Posted on 26 November 2023 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
Range Rover Evoque LED Interior Lights Installation
Replacing the original passenger compartment bulbs with those of the LED type, perhaps even opting for a particular color such as blue, will give the interior …read all…
Posted on 15 September 2023 by ScegliAuto
Car stereo (1) Battery (9) Gearbox (4) Spark plugs (1) Bodywork (1) Key (11) Timing belt (8) -board computer (7) Checks and maintenance (46) Dashboard (1) Air filter (2) Cabin air filter (3) Diesel filter (1) Hand brake (1) Accessory Kit (1) Light bulb (2) Headlight bulb (1) Interior lights ceiling light bulb (3) Antifreeze liquid (2) Handle (2) Gear oil (2) Door panel (6) Rear bumper (2) Brake pads (3) Instrument cluster (11) Fuse box (2) Seat (1) Lock (1) Suspensions (1) Outside rearview mirror (2) Turbine (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos