Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : How do you change the interior light bulb on your Land Rover Evoque?

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Interior lights ceiling light bulb
Operation: How do you change the interior light bulb on your Land Rover Evoque?

In order to replace the bulb of the interior lights of the Land Rover Evoque, it is necessary to pry the lower part of the corresponding ceiling light, so that the molding that surrounds it can be detached from its housing. Once the molding has been removed, the ceiling light can be extracted and its connectors can be disconnected: in this way the corresponding bulb inside can be extracted and it will be possible to replace it with a new one. After replacement, the ceiling light will have to be reassembled and the molding can be inserted around it.


Posted on 10 December 2022 by ScegliAuto



How to change the headlight bulb of the Land Rover Evoque
Land Rover Evoque (2011-2018 / MK 1, L538) Today we will discover how to disassemble and replace the headlight bulb of the Land Rover Evoque, in simple steps. First, open the hood of the car a
How to replace the headlight bulb on the Land Rover Evoque?
Land Rover Evoque (2011-2018 / MK 1, L538) In order to replace the Land Rover Evoque headlight bulb, you must first loosen the bolts that secure the front grille, which is located between the
How to replace the headlight bulb on the Land Rover Evoque?
Land Rover Evoque (2011-2018 / MK 1, L538) In order to replace the Land Rover Evoque headlight bulb, you need to lift the hood and access the rear part of the corresponding headlight. Here you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos