Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : How to replace the headlight bulb on the Land Rover Evoque?

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Light bulb
Operation: How to replace the headlight bulb on the Land Rover Evoque?

In order to replace the Land Rover Evoque headlight bulb, you need to lift the hood and access the rear part of the corresponding headlight. Here you will find a protective plastic cover, which must be removed: this will allow you to remove the bulb from its housing and disconnect it from its connector. Once the old bulb has been disconnected, it will be possible to insert the new bulb into its housing, after connecting it to its connector. At the end of the operation it will be possible to close the rear part of the lighthouse again with its cover.


Posted on 5 March 2024 by ScegliAuto



How to change the headlight bulb of the Land Rover Evoque
Land Rover Evoque (2011-2018 / MK 1, L538) Today we will discover how to disassemble and replace the headlight bulb of the Land Rover Evoque, in simple steps. First, open the hood of the car a
How to replace the headlight bulb on the Land Rover Evoque?
Land Rover Evoque (2011-2018 / MK 1, L538) In order to replace the Land Rover Evoque headlight bulb, you must first loosen the bolts that secure the front grille, which is located between the
How do you change the interior light bulb on your Land Rover Evoque?
Land Rover Evoque (2011-2018 / MK 1, L538) In order to replace the bulb of the interior lights of the Land Rover Evoque, it is necessary to pry the lower part of the corresponding ceiling ligh

Other guides that may interest you

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos