Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Land Rover Freelander

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

Today, let's go through the steps on how to remove and replace the front headlamp bulb on the Land Rover Freelander. First, open the vehicle's bonnet and begin unscrewing the fixing screws located at the top of the front headlamp, disconnecting the electrical connector for the lights found at the rear; remove the optical unit and separate the plastic cover from the lens, as shown in the video.

At this point, remove the faulty bulb and replace it with the new one (having the same fitting); reassemble and finally remount the optical unit!


Posted on 11 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp of the Land Rover Freelander 2.2 TD4?
How to Remove the Front Headlamp of the Land Rover Freelander 2.2 TD4?
Land Rover Freelander (2006-2016 / Freelander 2) To replace the front headlamp of the Land Rover Freelander, first lift the bonnet and remove the screws securing the old headlamp. Once loosened, dis…
How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
How to Change the Dipped Beam Bulb on a Land Rover Freelander 1
How to Change the Dipped Beam Bulb on a Land Rover Freelander 1
Land Rover Freelander (1997-2006 / Freelander 1) To change the bulb on the Land Rover Freelander, open the bonnet and secure it with the support rod. Go to the back of the headlamp where the bulb ne…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos