Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on the Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

To replace the front headlight bulb on the Land Rover Evoque, first loosen the bolts securing the front grille located between the two headlights and remove it. Then, using a socket wrench, loosen the nuts located on the top of the headlight. To extract it, lift the retaining clip found on the inside and pull the headlight out a few inches.

At this point, remove the inner protective cap, pull out the old bulb, and disconnect it from its connector. Then, insert the new bulb and reassemble all the previously removed parts.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Change the Headlight Bulb on a Land Rover Evoque
How to Change the Headlight Bulb on a Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's learn how to remove and replace the headlight bulb on a Land Rover Evoque in simple steps. First, open the hood of the vehicle and start…
How to Replace the Headlight Bulb on a Land Rover Evoque?
How to Replace the Headlight Bulb on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the headlight bulb on a Land Rover Evoque, lift the hood and access the back of the corresponding headlight. You will find a plastic prote…
How to replace the front headlight of the Land Rover Evoque
How to replace the front headlight of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) These short and simple steps will guide us through the process of disassembling and replacing the front headlight of the Land Rover Evoque. First, we…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos