Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : Light bulb

Land Rover Evoque - Light bulb

Land Rover Evoque (2011-2018 / MK 1, L538)
How to replace the headlight bulb on the Land Rover Evoque?
In order to replace the Land Rover Evoque headlight bulb, you need to lift the hood and access the rear part of the corresponding headlight. Here you will find …read all…
Posted on 5 March 2024 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
How to replace the headlight bulb on the Land Rover Evoque?
In order to replace the Land Rover Evoque headlight bulb, you must first loosen the bolts that secure the front grille, which is located between the two …read all…
Posted on 24 February 2024 by ScegliAuto
Car stereo (1) Battery (9) Gearbox (4) Spark plugs (1) Bodywork (1) Key (11) Timing belt (8) -board computer (7) Checks and maintenance (47) Dashboard (1) Air filter (2) Cabin air filter (3) Diesel filter (1) Hand brake (1) Accessory Kit (1) Light bulb (2) Headlight bulb (1) Interior lights ceiling light bulb (3) Antifreeze liquid (2) Handle (2) Gear oil (2) Door panel (6) Rear bumper (2) Brake pads (3) Instrument cluster (11) Fuse box (2) Seat (1) Lock (1) Suspensions (1) Outside rearview mirror (2) Turbine (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos