Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : Door panel

Land Rover Evoque - Door panel

Land Rover Evoque (2011-2018 / MK 1, L538)
How to remove the door panel of a Land Rover Evoque.
The removal of the door panel of the Land Rover Evoque is very simple. You can perform this operation independently, thanks to our video tutorial. The first …read all…
Posted on 21 January 2024 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
Disassembly of the front door panel of the Land Rover Evoque.
Today we will discover the process of how to disassemble and replace the front door panel of the Land Rover Evoque. First, we open the front door and begin …read all…
Posted on 26 May 2023 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
Removing the rear door panel Range Rover Evoque
Let's see in this video how to remove the rear door panel of a Range Rover Evoque, following these simple steps. First we open the rear door and with a T27 …read all…
Posted on 31 December 2023 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
Removing the door panel Range Rover Evoque
In this video tutorial we will see how to remove the front door panel of a Range Rover Evoque. First we open our door and start by removing the cover located …read all…
Posted on 12 December 2023 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
Removing the door panel Range Rover Evoque
In this video we are going to see how the door panel (driver side) of the luxury SUV Range Rover Evoque is removed. First we are going to disassemble the small …read all…
Posted on 6 December 2023 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
How to remove the Land Rover Evoque door panel
The disassembly of the door panel is quite simple to carry out but it is first necessary to intercept the plugs that mask the fixing screws: - a plug is …read all…
Posted on 3 September 2023 by ScegliAuto
Car stereo (1) Battery (9) Gearbox (4) Spark plugs (1) Bodywork (1) Key (11) Timing belt (8) -board computer (7) Checks and maintenance (46) Dashboard (1) Air filter (2) Cabin air filter (3) Diesel filter (1) Hand brake (1) Accessory Kit (1) Light bulb (2) Headlight bulb (1) Interior lights ceiling light bulb (3) Antifreeze liquid (2) Handle (2) Gear oil (2) Door panel (6) Rear bumper (2) Brake pads (3) Instrument cluster (11) Fuse box (2) Seat (1) Lock (1) Suspensions (1) Outside rearview mirror (2) Turbine (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos