Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel of a Range Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

In this video, see how to remove the rear door panel of a Range Rover Evoque by following these simple steps. First, open the rear door and use a T27 Torx screwdriver to remove the screws located under the plastic caps in the opening handle and near the grab handle.

Once all the screws are removed, start prying on the sides of the panel at several points. At this point, you can remove the door panel by disconnecting the handle cable and the electrical connector for the window switch, as shown in the video!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Removing Door Panel on Range Rover Evoque
Removing Door Panel on Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this video, you will see how to remove the door panel (driver's side) of the luxurious Range Rover Evoque SUV. First, remove the small plastic cov…
How to Replace the Rear Headlight Bulbs on the Land Rover Range Rover Evoque
How to Replace the Rear Headlight Bulbs on the Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's go through the steps to remove and replace the rear headlight bulbs on the Land Rover Range Rover Evoque. First, open the trunk and star…
Removing Door Panel from Range Rover Evoque
Removing Door Panel from Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this video tutorial, you will learn how to remove the front door panel from a Range Rover Evoque. First, open the door and start by removing the c…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos