Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Range Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

In this video, you will see how to remove the door panel (driver's side) of the luxurious Range Rover Evoque SUV. First, remove the small plastic cover near the handle's opening (snap-on): if you have leather upholstery, try not to damage the fabric.

Next, remove the plastic cap from the handle and unscrew the corresponding screw.

Remove the caps located on the sides of the door and unscrew the screws. At this point, pull the entire door panel towards you to disengage the clips at the back of the panel.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Removing the Rear Door Panel of a Range Rover Evoque
Removing the Rear Door Panel of a Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this video, see how to remove the rear door panel of a Range Rover Evoque by following these simple steps. First, open the rear door and use a T27…
Removing Door Panel from Range Rover Evoque
Removing Door Panel from Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this video tutorial, you will learn how to remove the front door panel from a Range Rover Evoque. First, open the door and start by removing the c…
How to Remove the Exterior Rearview Mirror from a Range Rover Evoque
How to Remove the Exterior Rearview Mirror from a Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Before you can start, open the front door of your Range Rover Evoque. Begin by removing the door panel, disengaging and taking out the inserts. Next,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos