Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Handle from a Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Handle

Before you can start, open the door of your Land Rover Range Rover Evoque. Begin by removing the screw cover that secures the handle using a small flathead screwdriver and prying it off. Once done, remove the screw itself with a Torx screwdriver. After completing this step, the handle will be free. Next, slide out the smaller section of the handle from its housing. Then, repeat this step for the remaining section. Once you have removed the remaining section of the handle, you have successfully completed the disassembly.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulb in a Land Rover Evoque?
How to Replace the Interior Light Bulb in a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the interior light bulb in a Land Rover Evoque, pry the lower part of the corresponding light fixture so that the trim surrounding it can …
How to Replace the Auxiliary Battery in a Land Rover Evoque?
How to Replace the Auxiliary Battery in a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the auxiliary battery in a Land Rover Evoque, go inside the cabin and remove the panel located directly under the glove compartment. Once …
How to Replace the Remote Battery in a Land Rover Evoque?
How to Replace the Remote Battery in a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the remote battery in a Land Rover Evoque, first open the remote. Remove the chrome cover with the RANGE ROVER lettering to insert a lever…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos