Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Door Panel of the Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Today, let's go through the procedure to remove and replace the front door panel of the Land Rover Evoque. First, open the front door and start unscrewing the mounting screws located on the grab handle and the opening handle.

Then, pry on the sides of the panel to detach it, disconnecting the electrical connector and the handle cable found on the back, as shown in the video. The video also demonstrates how to replace the speaker, applying the reverse procedure for reassembling the door panel!


Updated on 28 July 2026 by ScegliAuto


Related tutorials

Land Rover Evoque (2011-2018 / L538, MK 1) Removing the door panel of a Land Rover Evoque is very simple. You can perform this operation on your own, thanks to our video tutorial. The first st…
Land Rover Evoque (2011-2018 / L538, MK 1) These brief and simple steps will show you how to remove the front seat of the Land Rover Evoque, following the instructions below. First, open the f…
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos