Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Door trim panel

Removing the door panel of a Land Rover Evoque is very simple. You can perform this operation on your own, thanks to our video tutorial. The first step is to open the affected door and remove the handle and window switch using a plastic trim tool. The second step is to remove the Torx screws that secure the panel to the door. The third step is to remove the panel using the plastic trim tool. Once the panel is removed, you will need to disconnect the connector to fully extract it.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Door Panel of the Land Rover Evoque
Removing the Front Door Panel of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's go through the procedure to remove and replace the front door panel of the Land Rover Evoque. First, open the front door and start unscr…
How to Remove the Inner Panel of the Rear Hatch of the Land Rover Evoque
How to Remove the Inner Panel of the Rear Hatch of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, you will discover the steps to remove the inner panel of the rear hatch of the Land Rover Evoque trunk. First, open the rear hatch and start p…
Removing the Rear Door Panel of a Range Rover Evoque
Removing the Rear Door Panel of a Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this video, see how to remove the rear door panel of a Range Rover Evoque by following these simple steps. First, open the rear door and use a T27…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos