Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Fuse Boxes in the Land Rover Evoque?

Model: Land Rover Evoque L551, MK 2 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuse box

See other generations:
Video tutorial

The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.

Specifically, the first is in the engine compartment, covered by a protective panel, while the second is in the glove compartment inside the cabin. The third fuse box in the Land Rover Evoque is located in the trunk and is hidden behind the side panel of the trunk.

Simply remove it to access the various fuses inside and replace the damaged one.


Posted on 9 October 2026 by ScegliAuto


Related tutorials

What is the fuse layout of the Land Rover Evoque?
What is the fuse layout of the Land Rover Evoque?
Land Rover Evoque (2018-2026 / L551, MK 2) In this video we can see where the fuse boxes of the Land Rover Evoque are located and what the respective diagrams are, to consult in case we need t…
What is the fuse diagram for the Land Rover Evoque?
What is the fuse diagram for the Land Rover Evoque?
Land Rover Evoque (2018-2026 / L551, MK 2) If devices in your Land Rover Evoque suddenly stop working, first check the status of the related fuses, which are shown in this video. The first fus…
How to replace the gear knob of the Land Rover Evoque
How to replace the gear knob of the Land Rover Evoque
Land Rover Evoque (2011-2018 / MK 1, L538) Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following …

Other guides you may be interested in

How to Replace the External Door Handle on a Renault Master

Today's instructions will show you the procedure for removing and replacing the external door handle on the front door of the Renault Master. First, open the front door and start removing the door panel by unscrewing all the fixing screws; then unscrew the handle screws, pulling it out from the outside as shown in the video. At this point, install the new external handle, as well as the original one, checking its proper operation; finally, reassemble the door panel, following the video until the end!

Watch the video!


by ScegliAuto

More videos