Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the smart key of the Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Key

When the smart key of the Land Rover Evoque does not work properly, it will be necessary to perform a reset that allows the device to work correctly: to do this, you will need to close the car using the lock button while inside the cabin. Once the car is closed, wait a few seconds and then open it using the unlock button: at this point, place the key on the central tunnel and start the engine with the button. Now you will notice that the engine will start and everything will be functioning.

Posted on 31 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Range Rover Evoque with the Emergency Key
Land Rover Evoque (2011-2018 / L538, MK 1) This video explains both verbally and visually how to open and start the mentioned vehicle. First, open the side cover of the Smart Key and pull out …
How to Open the Door Without the Key on a Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this video tutorial, you will see how to open the door without the key on a Land Rover Evoque. The Land Rover Evoque is equipped with numerous tec…
How to replace the gear knob of the Land Rover Evoque
How to replace the gear knob of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos