Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Evoque
  6. : How do I reset the Land Rover Evoque Service light?

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Checks and maintenance
Operation: How do I reset the Land Rover Evoque Service light?

In order to reset the Land Rover Evoque Service warning light, you need to open the bonnet and the driver's door, turning the ignition key to turn on the instrument panel. In this way, a message will appear indicating the need for maintenance: while the ignition is on, keep the accelerator and brake pedals pressed at the same time for about 60 seconds. Then you can release both pedals and turn the key to turn off the ignition; when this is turned on again, it will be possible to notice that the light has been correctly reset.


Posted on 24 October 2022 by ScegliAuto



How do you reset the Land Rover Evoque Service light?
Land Rover Evoque (2011-2018 / MK 1, L538) The Land Rover Evoque Service warning light can be reset by going inside the passenger compartment and turning on the instrument panel, after inserti
How do you reset the Service light on the Land Rover Evoque?
Land Rover Evoque (2011-2018 / MK 1, L538) On the Land Rover Evoque, it is possible to reset the Service light by turning on the instrument panel, inserting the appropriate ignition key, and p
To reset the service of a Land Rover Evoque.
Land Rover Evoque (2018-2024 / MK 2, L551) To reset the service light on a Land Rover Evoque without a diagnostic tool, after performing a service on your own, you need to follow a different p

Other guides that may interest you

    Frequently Asked Questions

    • Evoque 2011-2018 - What are the problems with the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - What are the probable problems that the 2016 Range Rover Evoque has presented in the past? Read Answer
    • Evoque 2018-2025 - What can cause issues with the Land Rover Evoque's reverse camera? Read Answer
    • Evoque 2011-2018 - What does the tire pressure warning light on the Land Rover Evoque indicate? Read Answer
    • Evoque 2011-2018 - What problems can AdBlue cause for the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - What problems does the Land Rover Evoque have? Read Answer
    • Evoque 2011-2018 - How to restore the service light on the Evoque? Read Answer
    • Evoque 2011-2018 - Why is the gear selector on my Land Rover Evoque stuck? Read Answer
    • Evoque 2011-2018 - How much does the Land Rover Evoque service cost? Read Answer
    • Evoque 2011-2018 - What does the limited functionality SOS light on Range Rover Evoque mean? Read Answer
    • Evoque 2011-2018 - What problems does the Land Rover Evoque have when starting up? Read Answer
    • Evoque 2011-2018 - What does the "limited performance" message mean in the Land Rover Evoque? Read Answer
    • Evoque 2018-2025 - What are the warning lights on the Lange Rover Evoque? Read Answer
    • Evoque 2011-2018 - Every how many km should the Land Rover Evoque be serviced? Read Answer
    • Evoque 2011-2018 - What are the problems of the 2012 Evoque? Read Answer
    • Evoque 2011-2018 - What problems does the Land Rover Evoque EGR valve have? Read Answer
    • Evoque 2011-2018 - What problems does the Range Rover Evoque have? Read Answer
    • Evoque 2011-2018 - Why does the Range Rover Evoque door not close? Read Answer
    • Evoque 2011-2018 - How often should Range Rover Evoque be serviced? Read Answer
    • Evoque 2011-2018 - How much does it cost to replace the timing chain on a Range Rover Evoque? Read Answer

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos