Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Evoque
  6. : Disassembly of the Range Rover Evoque dashboard

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Dashboard
Operation: Disassembly of the Range Rover Evoque dashboard

Remove the screw cover in the upper part of the panel and unscrew the screw below. Then remove the side protection (you have to open the door) and you will have found another screw to remove. With a plastic lever remove the protection under the speedometer and unscrew the other screws now uncovered, as shown in the video. Pull out the panel and disconnect its connectors. To reassemble, obviously proceed backwards, so: connect the connectors to the new instrument panel, insert it in its seat and screw it, then mount the various protections. As you can see, this is an operation within everyone's reach.


Posted on 20 January 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos