Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the 2020 Range Rover?

Model: Land Rover Range Rover MK 2 - Years 2012-2021
Part: Dashboard

If you want to locate the OBD port of your 2020 Range Rover by yourself, just follow these simple steps. First of all, the car's OBD port is located inside the cabin, so you need to reach the driver's seat and make sure the car is completely turned off. At this point, shift your attention to the lower area of the dashboard near the accelerator pedal. Locate the OBD port on the right side and you're done. To use it correctly, just connect any compatible diagnostic tool with the appropriate cable.

Posted on 25 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to program the remote control of the Land Rover Range Rover
How to program the remote control of the Land Rover Range Rover
Land Rover Range Rover (2012-2021 / MK 2) To program the new key for the Land Rover Range Rover so that it starts the engine, a device is used in the video that must be connected to the car's…
How to Reset the Automatic Transmission of a Land Rover Range Rover Sport
How to Reset the Automatic Transmission of a Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) In this guide, learn the necessary instructions to reset the automatic transmission of the Land Rover Range Rover Sport, as well as other models from…
How do you reset the tire pressure warning light on the Land Rover Range Rover?
How do you reset the tire pressure warning light on the Land Rover Range Rover?
Land Rover Range Rover (2022-2026 / L460) The tire pressure warning light that appears on the instrument panel of the Land Rover Range Rover can be reset by inflating the tires to the recomme…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos