Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Driver Side Armrest of a Range Rover

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Seat

See other generations:
Video tutorial

Remove and replace the armrest on the driver side seat of a Range Rover. Enter the vehicle from the passenger side (to keep the armrest in front).

Use a prying tool to detach the plastic cap covering the screw that secures the armrest. Use a socket wrench to unscrew the bolt that secures the armrest to the seat, then detach the armrest after removing the bolt.

Install the new armrest onto the seat and tighten the securing bolt. After tightening the bolt inside the seat armrest, you can close the hole with the screw cover cap.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Remove the Center Console on a Land Rover Range Rover?
How to Remove the Center Console on a Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) To remove the center console on a Land Rover Range Rover, use a tool like a screwdriver to pry up the coverings of the rear armrest pins: once these …
How to Reset the Service Light on a 2017 Range Rover
How to Reset the Service Light on a 2017 Range Rover
Land Rover Range Rover (2012-2021 / MK 2) If you own a 2017 Range Rover and want to learn how to properly reset the service light, follow the steps outlined in this guide. First, ensure you h…
How to Remove the Driver's Door Panel on the Land Rover Range Rover?
How to Remove the Driver's Door Panel on the Land Rover Range Rover?
Land Rover Range Rover (2002-2012 / L322, MK 3) In this tutorial, you will see how to remove the driver's door panel on the Land Rover Range Rover, a very simple operation. First, open the door in …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos