Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Driver's Door Panel on the Land Rover Range Rover?

Model: Land Rover Range Rover L322, MK 3 - Years 2002-2012
Part: Door trim panel

In this tutorial, you will see how to remove the driver's door panel on the Land Rover Range Rover, a very simple operation. First, open the door in question, then remove the indicated plastic caps, including the one located inside the opening handle. Using both a Torx T20 and a T30 wrench, unscrew the exposed screws. Once this is done, pry along the perimeter of the panel, separate it from the door, and disconnect the internal connector of the window regulator. To install the replacement, simply follow the reverse procedure.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Exterior Mirrors on the Land Rover Range Rover?
How to Adjust the Exterior Mirrors on the Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) To adjust the exterior mirrors on the Land Rover Range Rover, close the driver's door and use the buttons located on the driver's door control panel.…
Installing Front Door Panel on Land Rover Range Rover L322
Installing Front Door Panel on Land Rover Range Rover L322
Land Rover Range Rover (2002-2012 / L322, MK 3) In this video, learn how to install the front door panel on a Land Rover Range Rover L322 in simple steps. First, open the front door and connect all…
How to disassemble the front door panel of the Land Rover Range Rover
How to disassemble the front door panel of the Land Rover Range Rover
Land Rover Range Rover (2002-2012 / L322, MK 3) Below we will see the instructions on how to disassemble and remove the front door panel of the Land Rover Range Rover. First, we open the front door…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos