Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : How to replace the handle of the Land Rover Range Rover

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover MK 3, L322 - Years 2002-2012
Part: Handle
Operation: How to replace the handle of the Land Rover Range Rover

To carry out this simple and quick operation you can follow this practical and short video guide, in fact to proceed with the replacement you will have to remove both the door panel and then also the block indicated in the video, if necessary also a part of the protective sheet, now you will have to remove the bolt indicated in the video, it is located on the side of the door at the same height as the handle, in fact, after unscrewing the bolt you can extract the handle latch, then you will have to remove the bolts indicated in the video in order to completely extract the handle.


Posted on 7 October 2023 by ScegliAuto



Land Rover Range Rover L322 front door panel assembly
Land Rover Range Rover (2002-2012 / MK 3, L322) Let's see in this video how to install the front door panel on a Land Rover Range Rover L322, in simple steps. First of all, open the front door and
How do you replace the seat belt of the Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) In order to remove the seatbelt of the Land Rover Range Rover, you first need to lever the plastic trims located at the bottom of the seatbelt reel.
How to disassemble the tailgate panel in the Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) As we can see in this tutorial, removing the tailgate panel in the Land Rover Range Rover L405 is an extremely simple and quick operation. First of a

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos