Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Panel on the Land Rover Range Rover?

Model: Land Rover Range Rover MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

As seen in this tutorial, removing the tailgate panel on the Land Rover Range Rover L405 is a very simple and quick task. First, open the tailgate itself.

Then, using a plastic trim tool to avoid leaving any marks, pry along the entire perimeter of the panel and detach it. Next, disconnect the sensor connector, being careful not to damage the wire. Proceed to replace the damaged component and reassemble everything by following the reverse procedure.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Replace the Camera on a Land Rover Range Rover
How to Replace the Camera on a Land Rover Range Rover
Land Rover Range Rover (2002-2012 / L322, MK 3) Are you replacing the camera on a Land Rover Evoque? Open the trunk hood. Using a screwdriver, remove the screws securing the plastic cover on the lo…
How to Replace the Outside Rearview Mirror on a Land Rover Range Rover?
How to Replace the Outside Rearview Mirror on a Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) To replace the outside rearview mirror on a Land Rover Range Rover, loosen the screws that secure the door panel to its housing so that it can be com…
How to reset the service in the Land Rover Range Rover?
How to reset the service in the Land Rover Range Rover?
Land Rover Range Rover (2022-2026 / L460) In this tutorial, we can see how to reset the service in the Land Rover Range Rover, an extremely simple and quick operation, to be carried out only …

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos