Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Range Rover - Door panel

Land Rover Range Rover (2012-2021 / MK 2)
How to disassemble the tailgate panel in the Land Rover Range Rover?
As we can see in this tutorial, removing the tailgate panel in the Land Rover Range Rover L405 is an extremely simple and quick operation. First of all, we …read all…
Posted on 14 August 2023 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
How to remove front door panel in Range Rover?
We disassemble the door panel by following the instructions shown in the video. Let's unscrew all the screws present and which hold the panel fixed to the door …read all…
Posted on 29 May 2023 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
How to disassemble the driver's door panel in Land Rover Range Rover?
In this tutorial we can see how to disassemble the driver's door panel in a Land Rover Range Rover, a very simple operation. First of all, open the door in …read all…
Posted on 24 April 2023 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
Removal of the door panel Range Rover Sport
Using a flat screwdriver, remove the upper lateral screw cover and unscrew the screw underneath it, then do the same thing with the central screw cover (see …read all…
Posted on 29 March 2024 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
How to remove the cover panel of the Range Rover
Let's see how the rear door cover panel of a Range Rover is removed. We detach the part of the lower cover placed above the panel, we detach the screw cover on …read all…
Posted on 30 January 2024 by ScegliAuto
Land Rover Range Rover (2012-2021 / MK 2)
Removing the door panel on Land Rover Range Rover Sport L320
In this video we will see the steps that will allow us to remove the front door panel on a Land Rover Range Rover Sport L320. First we open the front door and …read all…
Posted on 28 January 2024 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
Removing the door panel and window lift motor on Range Rover Sport
Using one or two plastic wedges, remove the silver plate under the leather handle (be careful not to break the hooks). Unscrew the four screws (one large and …read all…
Posted on 6 January 2024 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
Land Rover Range Rover L322 front door panel assembly
Let's see in this video how to install the front door panel on a Land Rover Range Rover L322, in simple steps. First of all, open the front door and connect …read all…
Posted on 6 January 2024 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
How to remove the door panel on a Range Rover Sport
How to remove the door panel on a Land Rover Sport? Don't worry, before starting the disassembly work, let's disconnect the battery terminals in the engine …read all…
Posted on 3 November 2023 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
How to remove the door panel on Land Rover Range Rover
How to remove the right panel on Land Rover: disconnect the battery terminals in the engine compartment, with a screwdriver unscrew the screws located in the …read all…
Posted on 24 October 2023 by ScegliAuto
Land Rover Range Rover (1994-2002 / MK 2)
Door panel removal instructions
The disassembly of the door panel is very simple to carry out since the panel itself is fixed with easily accessible screws; the screws are placed along the …read all…
Posted on 6 September 2023 by ScegliAuto
Alternator (2) Car stereo (6) Battery (15) Gearbox (6) Bodywork (1) Control unit (1) Key (26) Timing belt (5) V-belt (1) -board computer (4) Checks and maintenance (29) Tail light (2) Cabin air filter (6) Diesel filter (2) Oil filter (1) Hand brake (2) Accessory Kit (2) Headlight bulb (3) Rear light bulb (1) Handle (1) Gear oil (2) Engine oil (3) Power steering oil (1) Door panel (11) Front bumper (2) Rear bumper (1) Tires (1) Fuel pump (2) Instrument cluster (6) Radiator (1) Fuse box (9) Seat (4) Suspensions (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos