Do it yourself
Frequently asked questions about cars and motorcycles

Door Panel Removal Instructions

Model: Land Rover Range Rover MK 2 - Years 1994-2002
Part: Door trim panel

Removing the door panel is straightforward since it is secured with easily accessible screws. The screws are located along the edge of the storage pocket and at the ends of the inner handle. Before releasing the pressure clips, remove the trim around the internal opening lever. Once the panel is detached, push it upward to pull it out from the window seal, and after moving it away from the door, disconnect the speaker wires to complete the removal. Then, reverse the process for reinstallation.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Land Rover Range Rover (2012-2021 / MK 2) In this brief guide, we will cover the main instructions on how to remove and replace the timing belt on the Land Rover Range Rover Sport. First, ope…
Land Rover Range Rover (2002-2012 / L322, MK 3) Using one or two plastic wedges, remove the silver plate located under the leather handle (be careful not to break the clips). Unscrew the four screw…
Land Rover Range Rover (1994-2002 / MK 2) The driver side sun visor is attached to the headliner with three screws through the left hinge, while on the right side there is a support bracket w…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos