Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cover Panel of a Range Rover

Model: Land Rover Range Rover MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

Let's see how to remove the rear cover panel of a Range Rover door. Remove the lower cover part above the panel, and detach the screw cover on the side of the door.

Unscrew the screws in the space of the upper door handle and the screws located around the cover panel. Release the retaining clips from behind the door panel.

Finally, pull the panel off by hand and disconnect it from the door (disconnect the power wiring and the opening cable). Replace the door panel if it is irreparably damaged.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Range Rover Sport?
How to Replace the Key Battery on a Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) If the battery in the Smart Key of your Land Rover Range Rover Sport is dead, follow the attached video guide for step-by-step instructions on how to…
How to Recharge the Auxiliary Battery of the Range Rover Sport
How to Recharge the Auxiliary Battery of the Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) In this video, see where the auxiliary battery of the Range Rover Sport is located and how to recharge it. A vehicle with a large amount of electroni…
Disassembly of the external rearview mirror of the Land Rover Range Rover
Disassembly of the external rearview mirror of the Land Rover Range Rover
Land Rover Range Rover (2012-2021 / MK 2) Let's see the information regarding the disassembly and replacement of the external rearview mirror of the Land Rover Range Rover. First of all, we o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos