Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Range Rover - Bodywork

Land Rover Range Rover (2002-2012 / L322, MK 3)
Where is the legal chassis number (VIN) of the Range Rover MK3
Let's see where the legal chassis number (VIN) is located, the one punched right on the chassis of the car and which is used in case of cross-check by the …read all…
Posted on 26 December 2022 by ScegliAuto
Alternator (2) Car stereo (6) Battery (15) Gearbox (6) Bodywork (1) Control unit (1) Key (26) Timing belt (5) V-belt (1) -board computer (4) Checks and maintenance (29) Tail light (2) Cabin air filter (6) Diesel filter (2) Oil filter (1) Hand brake (2) Accessory Kit (2) Headlight bulb (3) Rear light bulb (1) Handle (1) Gear oil (2) Engine oil (3) Power steering oil (1) Door panel (11) Front bumper (2) Rear bumper (1) Tires (1) Fuel pump (2) Instrument cluster (6) Radiator (1) Fuse box (9) Seat (4) Suspensions (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos