Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : Diesel filter

Land Rover Range Rover - Diesel filter

Land Rover Range Rover (2002-2012 / L322, MK 3)
Where is the fuel filter located in the Land Rover Range Rover Sport?
The diesel filter in the Range Rover Land Rover Sport is not easily accessible, it is in fact necessary to go under the bottom of the car by raising it or …read all…
Posted on 26 April 2024 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
Land Rover Range Rover Sport diesel filter replacement
Let's see in this guide how to remove and replace the diesel filter of the Land Rover Range Rover Sport, following these simple steps. First of all we lift the …read all…
Posted on 18 April 2024 by ScegliAuto
Alternator (2) Car stereo (6) Battery (15) Gearbox (6) Bodywork (1) Control unit (1) Key (26) Timing belt (5) V-belt (1) -board computer (4) Checks and maintenance (29) Tail light (2) Cabin air filter (6) Diesel filter (2) Oil filter (1) Hand brake (2) Accessory Kit (2) Headlight bulb (3) Rear light bulb (1) Handle (1) Gear oil (2) Engine oil (3) Power steering oil (1) Door panel (11) Front bumper (2) Rear bumper (1) Tires (1) Fuel pump (2) Instrument cluster (6) Radiator (1) Fuse box (9) Seat (4) Suspensions (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos