Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Range Rover - Seat

Land Rover Range Rover (2002-2012 / L322, MK 3)
How to remove the driver's armrest on a Range Rover
Let's disassemble and replace the driver's seat armrest on a Range Rover, let's see how. We enter the vehicle from the passenger side (so as to keep the …read all…
Posted on 2 December 2023 by ScegliAuto
Land Rover Range Rover (2002-2012 / L322, MK 3)
How to set the Range Rover Sport driver seat adjustment memory
This off-road vehicle with truly generous dimensions certainly represents the maximum in terms of comfort and accessories present in the equipment: among these …read all…
Posted on 16 September 2023 by ScegliAuto
Land Rover Range Rover (1994-2002 / MK 2)
Front seat disassembly instructions
The disassembly of the front seat is relatively simple to carry out, the only precaution is the final phase in which you have to disconnect the sockets of the …read all…
Posted on 9 September 2023 by ScegliAuto
Land Rover Range Rover (1994-2002 / MK 2)
Seat belt pretensioner replacement
In the event of an impact, the pre-tensioning system of the seat belts may be activated, which serves to block the sliding of the seat belt and ensure that the …read all…
Posted on 28 August 2023 by ScegliAuto
Alternator (2) Car stereo (6) Battery (15) Gearbox (6) Bodywork (1) Control unit (1) Key (26) Timing belt (5) V-belt (1) -board computer (4) Checks and maintenance (29) Tail light (2) Cabin air filter (6) Diesel filter (2) Oil filter (1) Hand brake (2) Accessory Kit (2) Headlight bulb (3) Rear light bulb (1) Handle (1) Gear oil (2) Engine oil (3) Power steering oil (1) Door panel (11) Front bumper (2) Rear bumper (1) Tires (1) Fuel pump (2) Instrument cluster (6) Radiator (1) Fuse box (9) Seat (4) Suspensions (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos