Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel and Window Motor on Range Rover Sport

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

See other generations:
Video tutorial

Using one or two plastic wedges, remove the silver plate located under the leather handle (be careful not to break the clips). Unscrew the four screws (one larger and three smaller) that are now exposed.

Remove the small screw cover located behind the opening handle and unscrew the screw underneath. Use the plastic lever to pry around the door panel, releasing it from its seat until it is completely removed.

To fully detach the panel, disconnect the connectors and the lock. To remove the window motor, simply unscrew the T25 Torx screws that secure it.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to repair or replace the speakers of the Land Rover Range Rover Sport
How to repair or replace the speakers of the Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) The steps outlined in this guide will show us how to repair or replace the front speakers of the Land Rover Range Rover Sport. First, we open the fro…
Removing Door Panel on Land Rover Range Rover Sport L320
Removing Door Panel on Land Rover Range Rover Sport L320
Land Rover Range Rover (2012-2021 / MK 2) In this video, you will see the steps to remove the front door panel on a Land Rover Range Rover Sport L320. First, open the front door and pry on th…
How to Remove the Door Panel on a Range Rover Sport
How to Remove the Door Panel on a Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) How to remove the door panel on a Range Rover Sport? Don't worry, before starting the disassembly, disconnect the battery terminals located in the en…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos