Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Range Rover Sport

Model: Land Rover Range Rover MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

Using a flathead screwdriver, remove the upper side cover and unscrew the screw underneath it. Then do the same with the center cover (see video). Now remove the plastic piece behind the opening handle and unscrew the third screw.

Remove the plastic panel below the handle (it is simply clipped in) and take out the other screws that are now exposed. At this point, you can finally remove the door panel, remembering to disconnect the connectors properly without damaging them (press the tabs and pull, do not pull on the wires).

Good luck!


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Removing Door Panel on Land Rover Range Rover Sport L320
Removing Door Panel on Land Rover Range Rover Sport L320
Land Rover Range Rover (2012-2021 / MK 2) In this video, you will see the steps to remove the front door panel on a Land Rover Range Rover Sport L320. First, open the front door and pry on th…
How to Set the Time on a Range Rover Sport
How to Set the Time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before you begin, sit in the driver's seat of your Range Rover Sport. Start by activating the onboard computer by pressing the power button located o…
How to replace the instrument panel of the Range Rover Sport
How to replace the instrument panel of the Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) Today's procedure will show us how to disassemble and replace the instrument panel of the Land Rover Range Rover Sport. First, we get into the vehicl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos