Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Land Rover Range Rover

Model: Land Rover Range Rover L322, MK 3 - Years 2002-2012
Part: Door trim panel

To remove the right door panel on a Land Rover, disconnect the battery terminals in the engine compartment. Use a screwdriver to remove the screws located in the upper lever space of the door opening and the screws in the handle. Remove the trim plastic near the handle and unscrew the remaining screws on the door panel, then detach the retaining clips. Finally, pull the panel away from the door by hand and disconnect the power wiring and the opening cable. Reassemble everything in reverse order. Check that all pieces are correctly mounted.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing Front Door Panel on Land Rover Range Rover L322
Installing Front Door Panel on Land Rover Range Rover L322
Land Rover Range Rover (2002-2012 / L322, MK 3) In this video, learn how to install the front door panel on a Land Rover Range Rover L322 in simple steps. First, open the front door and connect all…
How to disassemble the front door panel of the Land Rover Range Rover
How to disassemble the front door panel of the Land Rover Range Rover
Land Rover Range Rover (2002-2012 / L322, MK 3) Below we will see the instructions on how to disassemble and remove the front door panel of the Land Rover Range Rover. First, we open the front door…
Removing Door Panel on Land Rover Range Rover Sport L320
Removing Door Panel on Land Rover Range Rover Sport L320
Land Rover Range Rover (2012-2021 / MK 2) In this video, you will see the steps to remove the front door panel on a Land Rover Range Rover Sport L320. First, open the front door and pry on th…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos