Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the Land Rover Range Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Tail light bulb

Today we will discover the process of disassembling and replacing the bulbs of the rear light of the Land Rover Range Rover Evoque, in simple steps. First, we open the rear tailgate of the trunk and start unscrewing the side fixing screws of the rear light; then we disconnect the electrical connector of the bulbs, in order to remove it, as shown in the video. At this point, we separate the bulb holder from the light fixture and proceed with the replacement of any faulty bulbs; finally, we reassemble the rear light, making the electrical connection!

Posted on 9 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Key Fob Battery for Land Rover Range Rover Evoque
Replacing the Key Fob Battery for Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this video, you will see how to disassemble and replace the battery of the key fob for a Land Rover Range Rover Sport, as well as the standard Ran…
Resetting the service light of the Land Rover Range Rover Evoque MK1.
Resetting the service light of the Land Rover Range Rover Evoque MK1.
Land Rover Evoque (2011-2018 / L538, MK 1) In this video we see the oil change of the Land Rover Range Rover Evoque engine being carried out; we need to reset the system that warns us, with a …
How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's go through the steps to reset the tire pressure light on the Land Rover Range Rover Evoque. First, get in the vehicle and turn on the ig…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos