Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Evoque
  6. : How to change the headlight bulb of the Land Rover Evoque

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Headlight bulb
Operation: How to change the headlight bulb of the Land Rover Evoque

Today we will discover how to disassemble and replace the headlight bulb of the Land Rover Evoque, in simple steps. First, open the hood of the car and start by removing the plastic protective cap found behind the headlight assembly; then rotate the bulb holder with the bulb to remove it, as shown in the video. At this point, replace and install the new low beam bulb, of the correct type and with the same fitting; insert it into the bulb holder and check its operation, finally installing the plastic cap of the headlight!


Posted on 23 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos