Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : Cabin air filter

Land Rover Evoque - Cabin air filter

Land Rover Evoque (2011-2018 / MK 1, L538)
How do I replace the cabin filter on the Land Rover Evoque?
In order to replace the cabin filter of the Land Rover Evoque, it is necessary to loosen the screws that secure the panel positioned immediately under the …read all…
Posted on 17 October 2022 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
Land Rover Evoque Cabin Air Filter Replacement
We see in this guide the instructions that will allow us to remove and replace the cabin air filter of the Land Rover Evoque. First of all we get on board the …read all…
Posted on 11 October 2022 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
How to replace the cabin filter on the 2017 Range Rover Evoque
For this guide we will see how to replace the cabin filter for the 2017 Range Rover Evoque, passenger side. The steps to take are as follows: 1. Remove the …read all…
Posted on 6 June 2022 by ScegliAuto
Car stereo (1) Battery (9) Gearbox (4) Spark plugs (1) Bodywork (1) Key (11) Timing belt (8) -board computer (7) Checks and maintenance (46) Dashboard (1) Air filter (2) Cabin air filter (3) Diesel filter (1) Hand brake (1) Accessory Kit (1) Light bulb (2) Headlight bulb (1) Interior lights ceiling light bulb (3) Antifreeze liquid (2) Handle (2) Gear oil (2) Door panel (6) Rear bumper (2) Brake pads (3) Instrument cluster (11) Fuse box (2) Seat (1) Lock (1) Suspensions (1) Outside rearview mirror (2) Turbine (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos