Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin air filter in a Land Rover Evoque, loosen the screws securing the panel located directly under the glove compartment on the passenger side. Once this panel is removed, also remove the side panel of the footwell and then the cover underneath.

Under this cover, you will find the cabin air filter, which needs to be pulled out of its housing to be replaced with a new one. After the new filter is installed, reassemble all the components that were previously removed.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter in the Land Rover Evoque
Replacing the Cabin Air Filter in the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) This guide provides instructions to remove and replace the cabin air filter in the Land Rover Evoque. First, get inside the vehicle on the front pass…
Where Are the Fuse Boxes in the Land Rover Evoque?
Where Are the Fuse Boxes in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…
How to Replace the Air Filter in the 2013 Land Rover Evoque
How to Replace the Air Filter in the 2013 Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Regularly replacing the engine air filter in your first-generation Land Rover Evoque (year 2013) is very important as it prevents potential overheati…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos