Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in the 2013 Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

Regularly replacing the engine air filter in your first-generation Land Rover Evoque (year 2013) is very important as it prevents potential overheating issues. Below, you will discover how to perform this operation safely and independently.

First, turn off the vehicle and allow the engine to cool sufficiently. Then, lift the hood and locate the filter box. Unscrew the various screws with a Phillips screwdriver and lift the cover of the box. Finally, replace the existing filter with a new one.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

Where Are the Fuse Boxes in the Land Rover Evoque?
Where Are the Fuse Boxes in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…
How to Replace the Rear Headlight Bulbs on the Land Rover Range Rover Evoque
How to Replace the Rear Headlight Bulbs on the Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's go through the steps to remove and replace the rear headlight bulbs on the Land Rover Range Rover Evoque. First, open the trunk and star…
How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's go through the steps to reset the tire pressure light on the Land Rover Range Rover Evoque. First, get in the vehicle and turn on the ig…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos