Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : How to replace the cabin filter on the 2017 Range Rover Evoque

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Cabin air filter
Operation: How to replace the cabin filter on the 2017 Range Rover Evoque

For this guide we will see how to replace the cabin filter for the 2017 Range Rover Evoque, passenger side. The steps to take are as follows: 1. Remove the external plastic cover by removing the 3 flat plastic supports inserted by interlocking, using a small tool that makes a minimum of leverage, without forcing too much; 2. To facilitate the work, disconnect the red cable from its white molex supports; 3. Next, remove the innermost white plastic panel by gently levering upwards on the 3 tabs that hold it together at the end. This holder is what covers the cabin filter; 4. Finally, simply remove the cabin filter upwards and replace it with a new spare or, alternatively, regenerate it appropriately.


Posted on 6 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Evoque 2011-2018 - What is the position of the air conditioning filter on the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Where is Land Rover Evoque cabin air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos