|
Do it yourself
| |||
| ||||
How to Unlock the Automatic Transmission of a Range Rover Evoque
Model: Land Rover Evoque
MK 2, L551
- Years:
2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
This guide shows how to unlock the automatic transmission of the Range Rover Evoque in the N position. If you cannot shift the transmission from P to N using the gear selector in the cabin, you can perform an emergency procedure to unlock it. From inside the engine compartment, you can unlock the transmission by acting on a lever located on top of the transmission. In fact, under the air filter, there is a lever that you need to move to the right and then secure it with a 6 mm pin in the designated hole. At this point, you can move the vehicle. The rearming of the transmission must be performed by a specialized center.
Updated on 27 April 2026 by ScegliAuto
Related tutorials
Land Rover Evoque
(2011-2018 /
MK 1, L538)
In this tutorial, you will see how to unlock the automatic transmission in the Land Rover Evoque, a very simple and quick operation to perform in cas…
Land Rover Evoque
(2011-2018 /
MK 1, L538)
In this short tutorial, you will see how to unlock the automatic transmission in the Land Rover Evoque, a very simple and quick operation to perform …
Land Rover Evoque
(2011-2018 /
MK 1, L538)
In this guide, you will find instructions to unlock the automatic gear selector in case of an emergency or if the Land Rover Evoque is disabled. Firs…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Change the Key Fob Battery for an Audi Q8?
To change the key fob battery for an Audi Q8, start by locating the release button on the key. Press this button to extract the emergency mechanical key. With the mechanical key removed, find the visible slot in the key body. Use a small flathead screwdriver or a plastic tool to gently pry open the key fob shell. Once the shell is open, you will find the battery, usually a CR2032. Note the orientation of the battery before removing it. Remove the old battery and insert the new one, ensuring the positive (+) side is oriented correctly. Reassemble the key fob shell, making sure all pieces fit together snugly. Finally, reinsert the mechanical key into its housing. Your key should now function properly with the new battery. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.040
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |