Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Evoque - Gearbox

Land Rover Evoque (2011-2018 / MK 1, L538)
How to unlock the automatic gearbox selector of the Land Rover Evoque
Let's see in this guide the instructions that will allow us to unlock the automatic transmission selector in case of emergency or breakdown of the Land Rover …read all…
Posted on 13 April 2024 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
How to unlock the automatic transmission in the Land Rover Evoque?
In this short tutorial, we can see how to unlock the automatic transmission in the Land Rover Evoque, a very simple and quick operation to be performed, for …read all…
Posted on 20 September 2023 by ScegliAuto
Land Rover Evoque (2011-2018 / MK 1, L538)
How to replace the automatic transmission oil of the Land Rover Evoque
Let's see how to change the automatic transmission oil of a Land Rover Evoque: (obviously, specific equipment is needed for this job and this is just an …read all…
Posted on 17 July 2023 by ScegliAuto
Land Rover Evoque (2018-2024 / MK 2, L551)
How to unlock Range Rover Evoque automatic transmission
The guide shows how to unlock Range Rover Evoque's automatic transmission in position N. If it is not possible to move the gearbox from position P to N by …read all…
Posted on 11 March 2024 by ScegliAuto
Car stereo (1) Battery (9) Gearbox (4) Spark plugs (1) Bodywork (1) Key (11) Timing belt (8) -board computer (7) Checks and maintenance (46) Dashboard (1) Air filter (2) Cabin air filter (3) Diesel filter (1) Hand brake (1) Accessory Kit (1) Light bulb (2) Headlight bulb (1) Interior lights ceiling light bulb (3) Antifreeze liquid (2) Handle (2) Gear oil (2) Door panel (6) Rear bumper (2) Brake pads (3) Instrument cluster (11) Fuse box (2) Seat (1) Lock (1) Suspensions (1) Outside rearview mirror (2) Turbine (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos