Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Land Rover Evoque - Body

Body Land Rover Evoque (2011-2018 / l 538, mk 1)

Land Rover Evoque (2011-2018 / L538, MK 1)
How to Open the Hood of a Range Rover Evoque?
The question posed does not have surprising results; indeed, opening the hood, even on the Range Rover Evoque, is done using the internal lever located next to …Read all…
Posted on 13 October 2026 by ScegliAuto
Land Rover Evoque (2011-2018 / L538, MK 1)
How to Install a Spoiler on a Car
The following guide shows how to mount a sporty spoiler on a car. Start by applying sheets of paper to the bodywork near the point where the spoiler will rest. …Read all…
Posted on 14 February 2026 by ScegliAuto
Airbag (1) Car stereo (1) Battery (9) Transmission (6) Spark plugs (1) Body (2) Key (26) Timing belt (11) Checks and maintenance (12) Dashboard (1) Headlight (2) Air filter (2) Cabin air filter (3) Diesel fuel filter (1) Parking brake (1) Accessory kit (1) Light bulb (3) Headlight bulb (1) Tail light bulb (1) Interior dome light bulb (3) Antifreeze coolant (2) Instrument panel light (1) Handle (2) Transmission fluid (2) Engine oil (1) Clock (3) Door trim panel (7) Rear bumper (2) Brake pads (4) Shift knob (2) Instrument cluster (1) Fuse box (7) Seat (1) Door lock (1) Brake system (1) Suspension system (1) Side mirror (3) AdBlue warning light (17) Warning light – error code (9) Tire pressure warning light (8) Service warning light (58) Windshield wipers (3) Turbocharger (1) EGR valve (2)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos