Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Spoiler on a Car

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Body

See other generations:
Video tutorial

The following guide shows how to mount a sporty spoiler on a car. Start by applying sheets of paper to the bodywork near the point where the spoiler will rest. Position the spoiler correctly and mark the outlines of the mounting points on the paper.

Using a drill and a fine bit, begin to drill the surface of the vehicle. Once this phase is complete, remove the paper sheets and proceed to secure the spoiler.

Remember, before drilling, that the inner part corresponds to the drilling itself.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Restore Limited Performance of the 2012 Range Rover Evoque
How to Restore Limited Performance of the 2012 Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) The engine power loss of a 2012 Land Rover Evoque is caused by a crack in the intercooler pipe. The pipe is located under the engine; to access it, y…
How to replace the gear knob of the Land Rover Evoque
How to replace the gear knob of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following …
Removing Range Rover Evoque Door Handle
Removing Range Rover Evoque Door Handle
Land Rover Evoque (2011-2018 / L538, MK 1) Open the car door, remove the cover (as shown in the video) using a flathead screwdriver. Once the cover is off, which should come off easily, use a …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos