Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob of the Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Shift knob

See other generations:
Video tutorial

Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following guide and follow the steps described.

First of all, make sure you have a new gear knob that is perfectly compatible with your Land Rover Evoque, then get into the car and remove the knob by pulling it upwards. Once removed, you can install the new knob and test its correct functioning by making some test changes.

If there are any errors in the installation, you can easily remove it and insert it again.


Posted on 10 May 2025 by ScegliAuto


Related tutorials

Where Are the Fuse Boxes in the Land Rover Evoque?
Where Are the Fuse Boxes in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…
How to Replace the Battery in a Land Rover Evoque?
How to Replace the Battery in a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the battery in a Land Rover Evoque, open the hood to locate the bracket at the top of the compartment: this can be removed from its housin…
How to Replace the Timing Chain on the Land Rover Evoque?
How to Replace the Timing Chain on the Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the timing chain on the Land Rover Evoque, open the hood to detach the cover on top of the engine block. This will provide access to the g…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos