Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Chain on the Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

See other generations:
Video tutorial

To replace the timing chain on the Land Rover Evoque, open the hood to detach the cover on top of the engine block. This will provide access to the gears at the top, around which the chain is located on the left side of the engine block; by loosening the central nuts that secure the gears, you can reduce the tension on the chain, allowing it to be removed.

Once the old chain is removed, you can install the new one by reassembling all the components that were removed earlier.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Land Rover Evoque (2011-2018 / L538, MK 1) To replace the timing chain on a Land Rover Evoque, open the hood to access the components in the engine compartment. On the left side, you will find…
Land Rover Evoque (2018-2026 / MK 2, L551) First, remove the engine from the vehicle and then disconnect the transmission. Proceed to remove the timing covers and replace the balance shafts. T…
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the timing belt on a Land Rover Evoque, loosen the bolts securing the right front wheel and those securing the inner fender cover. By remo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos